Lignin-Treated-Trichloromethylsilane Sorbent for Oil Spill Cleanup

Authors

  • Azhar N. A School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Rahman W.A.W. School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Adrus N. School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.
  • Majid R. A. School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Johor, Malaysia.

DOI:

https://doi.org/10.11113/jest.v1n2-2.30

Keywords:

Lignin, trichloromethylsilane, hydrophobic, sorbent, oil spill

Abstract

The effects of physical and chemical treatments of lignin with trichloromethylsilane (TCMS) as potential oil-spilled absorbent for waste water were investigated. The lignin was extracted from oil palm empty fruit bunch (OPEFB) using sodium hydroxide (NaOH) through soda process method. The lignin was treated with TCMS at various time reactions. The result revealed that over 94% reduction of hydroxyl (OH) group was achieved when TCMS was used. Besides, the hydrophobicity behaviour was improved with time reaction with water contact angle from 0° to 128°. Scanning electron microscopy (SEM) was conducted to examine the structure and morphology of treated lignin and leads to the presence of lumps and wavy on the fibre surface. In contrast, native lignin shows a smooth surface. The treated lignin can quickly absorb carotino oil with improvement in oil capacity compared with raw fiber, respectively. As such, good environmental friendly lignin-treated-TCMS (L-TCMS) can be considered as potential alternative in oil-spill clean-ups application.

References

Lim T. T., Huang X. 2007. Evaluation of Hydrophobicity/Oleophilicity of Kapok and Its Performance in Oily Water Filtration: Comparison of Raw and Solvent-treated Fibers. Industrial Crops and Products. 26: 125-134.

Hoai N. T., Sang N. N., Hoang T. D. 2016. Oil Spill Cleanup Using Stearic-acid-modified Natural Cotton. Journal of Materials and Environment Science. 7 (7): 2498-2504.

Behnood R., Anvaripour B., Jaafarzeadeh N., Farasati M. 2016. Oil Spill Sorption Using Raw and Acetylated Sugarcane Bagasse. Journal of Central South University. 23: 1618-1625.

Sun X. F., Sun R., Sun J. X., 2002. Acetylation of Rice Straw With or Without Catalysts and Its Characterization as a Natural Sorbent in Oil Spill Cleanup. Journal of Agricultural and Food Chemistry. 50: 6428-6433.

W.G. Glasser and S.S. Kelly. 1987. Light Stability of Polymers. Encyclopedia of Polymer Science and Engineering. 795-852.

Doherty W. O.S., Mousavioun P., Fellows C. M. 2010. Value-adding to Cellulosic Ethanol: Lignin Polymers. Industrial Crops and Products. 33(2):259-276.

Zhang Z., Zhang Y., Lin Z., Mulyadi A., Mu W., Deng Y. 2017. Butryric Anhydride Modified Lignin and Its Oil-water Interfacial Properties. Chemical Engineering Science. 165: 55-64.

Azhar N. A., Soloi S., Majid R. A., Jamaluddin J. 2015. Grafting Efficiency of Lignin-grafted-polyacrylic Acid. Applied Mechanics and Materials. 735: 182-185

Cunha A. G., Freire C., Silvestre A., Neto C. P., Gandini A., Belgacem M. N., Chaussy D., Beneventi D. 2010. Preparation of Highly Hydrophobic and Lipophobic Cellulose Fibers by A Straightforward Gas-solid Reaction. Journal of Colloid Interface Science. 344(2): 588–595.

Tejado A., Chen W. C., Alam M. N., Ven T. G. M v. d. 2014. Superhydrophobic Foam-like Cellulose Made of Hydrophobized Cellulose Fibres. Cellulose. 21: 1735-1743.

Arkles B. 2006. Hydrophobicity, Hydrophilicity and Silanes. Paint and Coating Industry Magazine

Lee, B.H. Choi, J.H. and Kim, H.J. 2006. Coating Performances and Characteristics for UV-Curable Aliphatic Urethane Acylates Coatings Containing Norrish Type I Photoinitiators. Journal of Coatings Technology and Research. 3(3): 221-229.

Oribaya O., Feng X., Rempel G. L., Pan Q. 2017. Synthesis of Lignin-based Polyurethane/graphene Oxide Foam and Its Application as An Absorbent for Oil Spill Clean-ups and Recovery. Chemical Engineering Journal. 323: 191-202.

Li S., Xie H., Zhang S., Wang X. 2007. Facile Transformation of Hydrophilic Cellulose Into Superhydrophobic Cellulose. The Royal Society of Chemistry. 4857-4859.

Siqueira, R. L., Yoshida, I. V. P., Pardini, L.C., Shiavon, M. A. 2007. Poly (borosiloxanes) as Precursors for Carbon Fiber Ceramic Matrix Composites. Material Research. 10(2): 147-151

Filiporic, R., Lazic, D., Perusic, M., Stijeporic, I. 2010. Oil Absorption in Mesoporous Silica Particles. Processing and Application of Ceramics. 4(4): 265-269

Wang J., Zheng Y., Wang Q. 2013. Coated Kapok Fiber for Removal of Spilled Oil. Marine Pollution Bulletin. 69: 91-96.

Downloads

Published

2019-02-10

How to Cite

N. A, A., W.A.W., R., N., A., & R. A., M. (2019). Lignin-Treated-Trichloromethylsilane Sorbent for Oil Spill Cleanup. Journal of Energy and Safety Technology (JEST), 1(2-2). https://doi.org/10.11113/jest.v1n2-2.30